Dodge F3R-S2-106R Flange-Mount Roller Bearing Units

Accessories:One Shield; Basic Dynamic Radial Load Rating C:8970 N; Basic Static Radial Load Rating Co:6000 N; Fillet Radius ra:0.64 mm; Grease Speed Rating Open/Shielded n1:14000 rpm; D:40.0000 mm; Oil Speed Rating Open/Shielded n2:17000 rpm; B:12.00 mm; d:17.000 mm;

PG:1/4 NPT; Taconite seal:TER 141; P60°:234 kN; Stabilizing ring:SR-34-0; R2:37.306 mm; H2:69.85 mm; Pa:43.6 kN; L:628.65 mm; N1:28.575 mm; J min.:492.125 mm;

Labyrinth ring:2 x LOR 45; Ca:42.799 mm; Cap bolt recommended tightening torque:298.3 N·m; Max. speed for PosiTrac Plus seal:2150 r/min; da:69.85 mm; R2:21.431 mm; h:31.75 mm; Mass pillow block:21.8 kg; Cap bolt, SAE grade:8; P150°:44.5 kN;

Fillet Radius ra:2.00 mm; Oil Speed Rating Open/Shielded n2:1400 rpm; Basic Dynamic Radial Load Rating C:182000 N; Basic Static Radial Load Rating Co:260000 N; B:38.00 mm; D:440.0000 mm; Grease Speed Rating Open/Shielded n1:1100 rpm; Accessories:One Shield; d:360.000 mm; Sealed Speed Rating n3:0 rpm

C:42 mm; Limiting speed:6000 r/min; Fatigue load limit Pu:28 kN; r5 min.:0.6 mm; a:51.239 mm; l:7 mm; Reference speed:4000 r/min; Db min.:97 mm; b:4 mm; Cb min.:5.5 mm;

Labyrinth ring:2 x LER 25; Da:120 mm; Bearing limiting speed:7500 r/min; P120°:13.3 kN; Cap bolt recommended tightening torque:149.1 N·m; Adapter sleeve assembly:SNW 11x2; J1:50.8 mm; R2:25.4 mm; RG:1/8 NPT; A1:79.375 mm;

Da max.:502 mm; s1 max.:25 mm; Mass bearing:98.2 kg; ra max.:4 mm; Reference speed:950 r/min; Fatigue load limit Pu:375 kN; Limiting speed:1300 r/min; Operating clearance factor k2:0.099; r1,2 min.:5 mm; Basic dynamic load rating C:2900 kN;

Variant:SFFX Two Shields; Basic Radial Load Rating-Dynamic DC:4380 N; Basic Radial Load Rating-Static SCO:2250 N; Adapter Sleeve AS:SNW6; Fillet Radius ra:1.00 mm; Speed Rating-Open and Shielded-Grease OSG:10000 rpm; Speed Rating-Open and Shielded-Oil OSO:13000 rpm; B:16.00 mm; Inside Diameter D:25.

D1:23 mm; Reference speed:4500 r/min; Eb max.:29 mm; Basic dynamic load rating C:11 kN; Limiting speed:9500 r/min; Thin universal washer:AS 1730; Shaft washer:WS 81103; d:17 mm; Mass bearing with a centring flange:0.011 kg; B1:3.5 mm;

H:336.55 mm; h:52.388 mm; P180°:94.3 kN; Eye bolt:2 x 3/8-16 UNC; Bearing:23036 CCK/W33; Taconite seal:TER 148; ba:68.263 mm; P60°:226 kN; Cap bolt, SAE grade:5; J min.:441.325 mm;

P150°:136 kN; Cap bolt, SAE grade:8; Eye bolt:2 x 1/2-13 UNC; PG:1/4 NPT; Pa:59.6 kN; ba:80.169 mm; Ca:101.803 mm; Max. speed for Taconite seal:385 r/min; R2:42.069 mm; Cap bolt recommended tightening torque:1735.4 N·m;

da min.:466 mm; ra max.:5 mm; s max.:10.8 mm; F:511 mm; Basic dynamic load rating C:5720 kN; D1 ≈:638 mm; Limiting speed:900 r/min; Reference speed:700 r/min; Calculation factor kr:0.34; da max.:500 mm;

Basic Dynamic Radial Load Rating C:95600 N; Accessories:Two Seals; Sealed Speed Rating n3:3200 rpm; B:41.30 mm; Basic Static Radial Load Rating Co:88000 N; Oil Speed Rating n2:4300 rpm; Fillet Radius ra:1.50 mm; Grease Speed Rating n1:3200 rpm; d:75.000 mm; D:130.0000 mm;

Basic Dynamic Radial Load Rating C:80900 N; Grease Speed Rating n1:4500 rpm; Accessories:One Shield; d:45.000 mm; D:100.0000 mm; Fillet Radius ra:1.50 mm; Oil Speed Rating n2:6000 rpm; B:42.90 mm; Basic Static Radial Load Rating Co:80000 N; Sealed Speed Rating n3:4500 rpm;